HDPE

MTL New Initiatives Pvt. Ltd. certifies that we will provide HDPE ‘Natural Grade’ PCR high quality resin (HDN038) produced from 100% PCR and adhering to following specifications under the brand “BORN AGAIN”. HDN038 is a High-Density Polyethylene grade suitable for general purpose extrusion blow moulding applications. Articles blown from this grade exhibit moderate to good stiffness. The resin offers good melt strength, ESCR and impact resistance. resin is high quality resin.

Type	Colour	Test Parameter	Standard	Unit	Virgin	HDN038
HDPE	Natural	Melt Flow (1900C/2.16 kg)	ASTM- D 1238	g/10 min	0.38	0.38 – 0.5
		Specific Gravity	ASTM- D792	-	0.96	0.96
		Tensile Strength	ASTM- D882	MPa	29.0	26.0
		Elongation @ break	ASTM- D 882	%	780	760
		Moisture	---	%	0.01	0.01
		Ash Content	ASTM- D2584	%	0.04	0.04 – 0.06
		Carbon Black Content	ASTM- D1603	%	0.3	0.03 – 0.05
		Density (230C)	ASTM- D1505	g/cc	0.94	0.94
		Melt Screen Size		Mesh		80 & 60

Note: The HDN038 TDS has been developed based on the results obtained from material produced during trial phase.

PP

MTL New Initiatives Pvt. Ltd. certifies that we will provide PP ‘Natural Grade’ PCR high quality resin (PPN012) produced from 100% PCR and adhering to following specifications under the brand “BORN AGAIN”. PPN012 is a Polypropylene grade suitable for general purpose injection moulding applications. Articles like rigid containers etc. from this grade exhibit moderate to good stiffness.

Type	Colour	Test Parameter	Standard	Unit	Virgin	PPN012
PP	Natural	Melt Flow (2300C/2.16 kg)	ASTM- D1238	g/10 min	12	12-14
		Specific Gravity	ASTM- D792	-	0.905	0.905
		Tensile Strength	ASTM- D638	MPa	30.0	28.0
		Elongation @ break	ASTM- D638	%	12	10
		Moisture	-	%	0.01	0.01
		Ash Content	ASTM- D2584	%	0.03	0.03 – 0.05
		Carbon Black Content	ASTM- D1603	%	0.03	0.03 – 0.05
		Density (230C)	ASTM- D792	g/cc	0.92	0.92
		Melt Screen Size		Mesh		80 & 60

Note : The PPN012 TDS has been developed based on the results obtained from material produced during trial phase.